Posts Tagged: metal detector

Crafts-Hobbies — Comments Off
27
Sep 10

Where to Use a Bounty Hunter Metal Detector to Find Little Treasures

Detecting little treasures such as old coins, antique metal items, and mementos is fun. If you want your adventure to become more productive then you have to use a reliable metal detector. One of the best products that you can use is a Bounty Hunter metal detector.

So, where can you find those little treasures? There is no need for you to go to far away places to find metal items that you can collect. Sometimes, nearby places are full of small objects that you may find worthy of collecting.

On the Backyard

Start in your own backyard. Use your Bounty Hunter and try to find things that you can collect. You can also treasure-hunt at your friend’s backyards and encourage them to join you. You have to look under old clotheslines, outhouses, walkways, and children’s playground. You may find old coins in those places or some old metal relics.

Old Parks

Park officials usually allow hobbyist metal detectors to scour the grounds. Just make sure that you will follow the specific rules of each park about the conduct of metal detecting. There are lots of valuable items that you can find in old parks, ballparks, promenade grounds, and picnic areas.

Riverbanks

You can use your Bounty Hunter metal detector to find small treasures on riverbanks. If there is a nearby camping ground along the riverbank, then you can surely find some old coins as well as antique mementos on those areas. You might also find old boat anchors at riverbanks that you can collect as souvenirs.

Crafts-Hobbies — Comments Off
10
Sep 10

Metal Detector Tips & Tricks For Success

So, you have purchased a new or used metal detector from our online store or elsewhere. Now what? To be successful with your new metal detector, you need to keep a few things in mind and put them into action.

The most important factor in success with metal detecting is to know your metal detector like you know your best friend or even better. In order to do this, you must read every word of the manual that came with your metal detector. After that, read it again and again. Learn what each control does and what every feature is all about. Refer to the metal detector manual often with any questions you may have. For a used metal detector that might not have come with a manual, visit the manufacturer’s website as most have downloadable manuals for their older models. Also, be sure to watch any DVDs or videos that came with your metal detector.

After getting intimate with the manual, it is time to get your metal detector outside and practice. Practice does make perfect! Bury some coins, rings and various junk items in your yard and experiment with each control and feature. Vary the depth of the buried items to see how it affects the response of your metal detector. Another method is to dive right in and search your yard, a local park or a nearby school yard. Listen and watch your metal detector at each target. Dig every find. This requires some work but it is the best way to get to know your metal detector. It took me about twenty hours of practice to begin to be proficient with the White’s XLT when I first started using it. I must have read the owner’s manual at least fifteen times and carried it along on every hunt! Knowing your metal detector is the most important key to being successful and happy with your purchase!

Finding the right place to search with your metal detector is very important. Becoming knowledgeable about your area’s history is highly recommended. The best place to start is at your local library. Find where all the old houses, gathering places, parks, schools, churches, etc. were located. Remember, if people were there, they more than likely left something behind for your metal detector to find. The larger the number of people at a location indicates a higher probability of finding something of value with your metal detector. Talk to the older folks in the community and ask about the places people used for picnics, social gatherings, ball playing and the like. Talking about the old days will also brighten their day!

Patience and persistence are important factors in making finds. My late Father, rest his soul, was always interested in using his metal detector but just didn’t have the patience for it. He would swing his metal detector for about an hour or less and just give up. I can still hear him say, “There just ain’t anything here!” Even if I was not finding much, I would hang in there and would usually find at least a few old coins. The moral of the story is not to give up on yourself or the metal detector. That find of a lifetime might be under your next swing of your metal detector!

Good ole common sense plays a major role too. Always try to put yourself in the shoes of those that might have gathered or lived where you are using a metal detector. This logical approach has served me well many times over the years. If searching a site that had a grass or gravel parking area, imagine all those folks dragging out their car keys along with a bunch of coins. At old house sites, think of where the clothes line might have been located. The wife might have missed some coins in the pant pockets on wash day and out they fell when hung on the line. My best Indian Head penny find was made using this logic. Look at any old trees or stumps and imagine the people relaxing and children playing under their shade on a hot summer’s day. Behind the old school imagine the kids rolling down the hill during recess with all their pennies, nickels and dimes flying out. You get the idea. All those lost goodies are buried there waiting for you and your trusty metal detector to come along!

Following these tips will make the difference between success with your metal detector or having it become a dust magnet in the back of your closet. A person with a $100 metal detector that follows these tips can very well out perform a person with a $1,000 metal detector that does not. Believe me, I have done it! Good luck and happy hunting!

Crafts-Hobbies — Comments Off
21
Feb 10

Metal Detectors and the Joy of Discovering

As the name suggests, a metal detector is a device which is used to detect the presence of metal and metallic materials and is used in a wide variety of different situations, perhaps on the beach to safely detect and remove non bio-degradable waste such as aluminum cans.

Metal detectors have became a standard feature in airports so as to detect and prevent the free movement of weapons and it is a sad reflection of the world and times we live in that schools are increasingly using them as well. The sensors that are included in metal detectors are exceptionally sensitive which means that they are capable of detecting metal through a number of different materials such as soil, fabric, wood and other non-metallic based substances.

Metal detectors all work in pretty much the same way, through use of electromagnetism, all metal detectors come with a battery which powers the transmitter which then emits the magnetic field. This magnetic field is then used when a metallic item is passed through the aura of the metal detector, the metal becomes magnetized and thus is detected by the sensors.

This electromagnetic signal is then received and transmitted direct to the electronic box and metal detectors come equipped with a speaker to help amplify the sound so that the user can know immediately that there is a metallic item.

It should be noted that there are a number of different metal detectors, each of which are used to detect more effectively a different metal, some metal detectors are sued for gold, others silver. Generally though, general-purpose ,metal detectors are more than sufficient for average use and such specialised metal detectors are only required for use in niche areas.

Like any other mechanical object, metal detectors will break down in time and will require some degree of maintenance and repair, which is relatively simply to achieve even for those who are not especially technically apt. The most common issue that interferes with the effective use of a metal detector is the amount of dirt and other fine particles that accumulate at the bottom of the detector, and these must be cleaned. To clean the main unit of metal detectors, hot water less than 40 degrees centigrade can be used, simply wipe off the excess dirt from the surface with a soft, non-abrasive cloth.

The conveyor belts also require a degree of maintenance, and are also rather easily fixed, neutral detergent and a plastic brush with soft bristles can be applied for the purpose, there is no need for specialized cleaning agents or solutions.

It may sound like a statement of the painfully obvious, but too many people purchase a metal detector, and do not bother to read the manual that comes with it, this is essential for the effective and proper use of the detector. This will allow you to more easily pinpoint any potential problems that may arise, and will also allow you to familiarize yourself with best practices so as to avoid any damaging conduct.

bounty hunter metal detector and other cool gadgets, please visit us at GiftGadgetGateway.com. Your leading gift gadget review including the laser keyboard.